Mordaunt-short MS309W User Manual download pdf (Page 9)

Getting Started

Attaching Feet to your Subwoofer

Your MS309W subwoofer comes with feet and spikes

which must be fitted to space the down-firing ports the

correct distance from the floor for optimum operation.

The spikes attach to the bottom of the feet (as shown below

left).

There are eight pilot holes on the bottom of the speakers.

The feet are located and secured here with the wood screws

supplied (below right). Level as required.

Running In

Your new unit will require a total of approximately 10 hours

of normal use to allow the components to settle into their

working routine and reach their optimum performance.

Connecting via Line Input

If your amplification system has a dedicated subwoofer line

output then you should connect your MS309W via the Line

Input on the rear panel using a good quality phono lead.

Note that if your amplification system has a mono

subwoofer line out then use the ‘L’ socket on your

MS309W.

Connecting via High Level Connections

Do not compromise the performance of your system by

using inferior quality cables! Mordaunt-Short recommends

that high quality cables of 16 gauge or higher be used. Your

professional dealer will give you good advice.

Observing polarity is of the utmost importance while

connecting your loudspeakers. Ensure that the red (+)

terminals on your amplification system are connected to the

red (+) on the subwoofer, and black (-) on your amplification

system to black (-) on your subwoofer.

Important Note: Always unplug all A.C. powered

components before making any loudspeaker or component

connections. This will avoid the risk of electric shock or

damage to your equipment

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Mordaunt-short MS309W User Manual Page 9